The purpose of the software lock appears to be limited to restricting the owner's use of the mobile handset to support a business model, rather than to protect access to a copyrighted. I'm going to take a perfectly good V3 that's unlocked and relock it back to T-Mobile to test this new program called Motorola Unlocker 2005. This is the driver for the Motorola V3 Razr. Its the inf file so you need to right-click on the file and click install. It will then install the driver for you. Normally it does not matter what the OS is when you are dealing with inf files. The driver is listed below. The inf file shows that this is the driver for the “Motorola.

Welcome to my first tutorial! Please make suggestions in this thread on how to improve it. I will try to be a comprehensive as possible but also as general as possible since flashing firmware to Motorola phones is a pretty consistent process. Disclaimer: Please note, like almost everything else on XDA-Developers.com doing this process without fully understanding it can possibly brick the phone (although if it probably already is) thus, I cannot be held liable for any damages caused by following this process. Jannat 1 Mashup Mp3 here.

In other words, the person performing the work performed in this post is fully responsible for their actions on this phone. /Disclaimer Before starting with the flashing a Motorola phone, please review the following information: • In most cases firmware versions CANNOT be downgraded • Firmware from other regions can sometimes be flashed, but not always, this is why it is always recommended to stick with the same firmware branch that is already on the phone • The phone that will be flashed should be fully charged, the fastboot flashing process only allows for phones that are over 50 or 60% to be flashed.

Quote: Originally Posted by danifunker Welcome to my first tutorial! Please make suggestions in this thread on how to improve it. I will try to be a comprehensive as possible but also as general as possible since flashing firmware to Motorola phones is a pretty consistent process. Disclaimer: Please note, like almost everything else on XDA-Developers.com doing this process without fully understanding it can possibly brick the phone (although if it probably already is) thus, I cannot be held liable for any damages caused by following this process. In other words, the person performing the work performed in this post is fully responsible for their actions on this phone.

/Disclaimer Before starting with the flashing a Motorola phone, please review the following information: • In most cases firmware versions CANNOT be downgraded • Firmware from other regions can sometimes be flashed, but not always, this is why it is always recommended to stick with the same firmware branch that is already on the phone • The phone that will be flashed should be fully charged, the fastboot flashing process only allows for phones that are over 50 or 60% to be flashed. • At this point, I would recommend to download the firmware to the computer that will be used for the flashing (once the phone is detectable in RSD Lite, that is a good indication the computer can detect the phone, navigate to and locate the correct firmware and version that should be loaded on the phone. If the firmware is not listed there, please put a request into the firmware team (supply the default.prop and build.prop files). They are pretty good with locating firmware! The firmware files are generally large (ranging anywhere between 200mb and 1500mb) so now would be a good time to top-up that phone charge (if possible). If it isn't possible to charge the phone, don't worry, the phone will automatically turn off if it doesn't detect a flashing process after a few minutes.